WITH ROLLER SHUTTER CONTROL
Z-WAVE 700 PLATFORM
Z-Wave Relay Switch quinto (5 channel) HE-RS01
With advanced zero-cross technology, dry contacts and 5A load for each channel
For lights, door locks, valves, and motorized devices control.
We back all of our HELTUN products with a 3 years extendable warranty.
Compatible with: Aeotec, ComfortClick, Eedomus, Ezlo, Fibaro HC LITE, HC2, HC3, Jeedom, Home Assistant, Homey, Hubitat, RazBerry, SmartThings, Thinka, Zipato gateways and Z-Wave JS library
When considering your comfort and convenience, what is most important?
Is it being able to turn on or off lights without running through different rooms?
Or be able to lock the door, close the blinds, and On/Off groups of lights by remote control?
Or maybe something else?
Whatever the need,
HELTUN has got you covered.
Five channel relays with dry contacts & 5 Amp load each.
HELTUN Advanced Zero-Cross Technology delivers greatly increased longevity & reliability of the system.
THE ONLY FIVE RELAY z-wave SWITCH ON THE MARKET
HELTUN Relay Switch Quinto is the only Z-Wave switch on the market with 5 dry contact relays and such a small size that fits any standard wall box.
Quinto can be used to control lighting, run scenes, electronic locks, electric valves, and motorized devices like curtains, blinds, gates, and windows.
It's a perfect tool to be be connected to both AC and DC appliances at the same time, for example DC motorized blinds, DC LED strip, and AC ceiling lighting. The power supply of the device is independent: from 24 to 265 VAC or VDC.
Enjoy the best functionality on the market with the following possible use cases:
YOUR FAVORITE HUB
The Relay Switch quinto with roller shutter control, brings incredible capabilities to any connected device. It makes light switches ‘smart’ with full remote monitoring, control, and advanced programmability. This brings the convenience of smartphone app control and automation to ‘dumb’ devices such as multi-gang light switches, electronic door locks, motorized gates, blinds, windows, and valves.
For example, you can control up to...
Five ON/OFF devices
Three ON/OFF devices, and one, two-direction motor
One ON/OFF device, and two, two-direction motors
At 26mm in depth, the Relay Switch quinto is also ‘impossibly small’, fitting into any rectangular, round or square electrical junction box, even behind attached devices.
INPUTS, OUTPUTS & SENSORS
The main power input can be 24-265 VAC or VDC. There are five relay outputs each with a maximum 5 Amp load. There are also two independent inputs for relay channels which allow control of systems with different power sources, or to use outputs as dry contacts: e.g. to switch ON/OFF 220VAC lights and control motorized valves with 24VDC power.
There are six pilot wire inputs: one common and five for each relay channel. This allows the Relay Switch quinto to be controlled by up to five different sources (e.g. five different light switches) and control all relay outputs separately. Each relay channel uses the HELTUN Advanced Zero-Cross Technology to deliver greatly increased longevity & reliability.
KNOW HOW MUCH ENERGY YOU USE
The HELTUN built-in Power Consumption System precisely monitors how much energy you used during any particular day, week, or month. Do your current light switches do that?
Just specify the consumption of the load in watts for each relay channel and the Relay Switch quinto logic will calculate total consumption relative to the time since the output was in the ‘ON’ state.
We have also designed the circuitry so it draws almost zero watts to power itself when in standby mode. This saves you energy and money especially if your home is equipped with many HELTUN products.
There are seven different modes that can be selected for the Relay Switch quinto with up to five pilot wires being used to control any relay output to devices like a wall switch, alarm panel, etc.
Invert State - If ON, turn OFF when pilot wire circuit is closed (or if OFF, switch ON).
Momentary - Switch ON when pilot wire circuit is closed, switch OFF when opened.
Momentary Reversed - Switch OFF when pilot wire circuit is opened, switch ON when closed.
Switch ON Only - When the pilot wire circuit is closed (i.e. short-circuited).
Switch OFF Only - When the pilot wire circuit is closed (i.e. short-circuited).
The Relay Switch quinto output can also be controlled by an internal timer. For example, after the switch is turned ON, it can be configured to automatically switch OFF a specified time later (or vice-versa: turn ON after being turned OFF). This function can be used to open or close garage doors, gates, blinds, curtains, locks, etc., and then return them to their previous state with no additional input.
Timer (ON then OFF) - Switch ON when pilot wire circuit is closed, then Switch OFF after specified time.
Timer (OFF then ON) - Switch OFF when pilot wire circuit is closed, then Switch ON after specified time.
MOTORIZED DEVICE CONTROLS
The HELTUN Relay Switch quinto does a lot more than just control house lights. You can use it to control motorized blinds, curtains, garage doors, driveway gates, and electric locks. You have full control over programming specific functions.
The system also calculates the position of the blinds when fully opened or closed and automatically stops the motor when it reaches the UP or DOWN limit.
SCHEDULES & SCENARIOS
Using the internal timekeeping of the HELTUN Relay Switch quinto, you can create schedules for some devices.
Open the blinds at 7:00AM and close them at 10:00PM
Switch on the porch light at 7:00PM and turn it off at 1:00AM.
The possibilities for adding convenience and comfort are endless and limited only by the creativity of the owner or installer of the HELTUN Relay Switch quinto.
MAKE CIRCUIT BREAKERS SMART
Is your DIN rail a ‘dumb’ rail?
Since the HELTUN Relay Switch quinto has 5 channels which can each handle up to 5 Amp loads, it is a perfect addition to your circuit breaker panel for monitoring and controlling groups of devices from the Internet through a Z-Wave gateway, such as:
Entire groups of lights
Motorized blinds, doors, and gates
The Micromodule Mounting Adaptor is available from HELTUN as an accessory for the Relay Switch quinto to fit standard DIN rails (50mm width), or it can also be mounted directly on the wall using the supplied screws & anchors.
EASY TO INStall
The HELTUN High Load Switch can be easily installed into any standard electrical junction box (rectangular, square, or round) in just minutes. Installation must only be performed by someone trained in handling high voltage electrical systems.
Z-WAVE PLUS V2 (700) COMPATIBLE
You can connect HELTUN devices to a Smart Home controller using the latest Z-Wave Plus V2 700 platform. HELTUN features advanced Smart Start technology for easy system integration, and the Security 2 (S2) framework with AES 256 encryption for safe data transfer.
This Relay Switch is compatible with all Z-Wave certified controllers and devices that properly implement Z-Wave switch classes. Using a Z-Wave controller, you can manage all switch functions via a mobile app including relays state changes, viewing energy consumption charts, and much more.
Up to 15 separate devices can be connected to your HELTUN Relay Switch quinto. You can associate it with any Z-Wave compatible ON/OFF switch, or other Switch, to control different systems in a room. You can even connect motion sensors and change the switch modes when people are detected in the house.
HELTUN devices are compatible with all Z-Wave frequencies for different countries (Europe, Russia, Israel, Australia, USA, India, Hong Kong, China, Japan, and Korea). The full list of Z-Wave regions and frequencies is available at Z-Wave Global Regions SiLabs page.
HELTUN periodically releases new device firmware with added features which can be remotely updated via an encrypted OTA (Over-The-Air) process.
Specifications & features
• Dimensions: 50x50x27mm
• Material: Flame retardant plastic
• Color: Black
• Five relays for resistive loads up to 5A each
• Two independent relay inputs (dry contact)
• Relay switching with HELTUN Advanced Zero-Cross Technology
• One common (S) and five pilot wires (S1, S2, S3, S4, S5) for external control
• Energy consumption software logic
• Operating temperature: 0°C to +50°C
• Power supply: 24-265 VAC or VDC
• Power consumption: 1W
• IP class: IP21
• Z-Wave Plus V2 SDK: V7.11
• Z-Wave module: ZGM130S
• Mounting – either:
• Flush electrical junction box:
round, rectangular or square type – min. depth 40mm
• Optional adapter for DIN Rail mounting (50mm width)
or on wall screwing
FUNCTIONAL SPECIFICATIONS :
• Options for Inclusion/exclusion to/from Z-Wave network
• S0 Secure
• S2 Unauthorized, S2 Authorized with Key
• Association control of Z-Wave devices in the network
• Motorized device control (roller shutter mode)
• Schedule Mode
• Each of the five pilot wires inputs can control any relay output
• Up to five outputs can be controlled by one pilot wire
• Seven modes for each relay output:
• Invert State (ON to OFF or OFF to ON)
• Momentary (ON when shorted, OFF when released)
• Momentary Reversed (OFF when shorted, ON when released)
• Switch ON Only
• Switch OFF Only
• Timer (ON then OFF after specified time)
• Timer (OFF then ON after specified time)
• Each relay outputs can be managed by Z-Wave gateway or associated device
• Each pilot wire can trigger scenes
• Power consumption software logic
• Factory reset button
• OTA (Over-The-Air) firmware update
Generic Device Class: GENERIC_TYPE_WALL_CONTROLLER
Specific Device Class: SPECIFIC_TYPE_NOT_USED
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E], V2 COMMAND_CLASS_ASSOCIATION [0x85], V2 COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59], V3 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E], V3 COMMAND_CLASS_MULTI_CHANNEL[0x60], V4 COMMAND_CLASS_CENTRAL_SCENE[0x5B], V3 COMMAND_CLASS_SWITCH_BINARY[0x25], V2 COMMAND_CLASS_BASIC [0x20], V2 COMMAND_CLASS_SENSOR_MULTILEVEL [0x31], V11 COMMAND_CLASS_METER [0x32], V4
COMMAND_CLASS_CLOCK [0x81], V1 COMMAND_CLASS_TRANSPORT_SERVICE [0x55], V2 COMMAND_CLASS_SECURITY [0x98], V1 COMMAND_CLASS_SECURITY_2 [0x9F], V1 COMMAND_CLASS_VERSION [0x86], V3 COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72], V2 COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A], V1 COMMAND_CLASS_POWERLEVEL [0x73], V1 COMMAND_CLASS_SUPERVISION [0x6C], V1 COMMAND_CLASS_INDICATOR [0x87], V3 COMMAND_CLASS_CONFIGURATION [0x70], V4 COMMAND_CLASS_APPLICATION_STATUS [0x22], V1 COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A], V5